WM2-Series 208V-480V GLQC Tap Box

208V, 480V Portable Generator and/or Load Bank Quick Connection Tap Box

LV Part Number Configurator & Budgetary Pricing

[caldera_form id=”CF5bdc5e6d26ec8″]

Tap Box Information

The APT Generator Quick Connection Tap Box (WM2 Series) is designed to allow your facility to be emergency power ready by providing a quick and safe connection of a mobile generator set in the event of loss of power. Having an APT WM2 Series tap box pre-installed will eliminate much of the chaos as well as hazards that can be associated with connecting a temporary generator during a facility power loss.

Standard Features

Wall-mountable
Rating:
- 120-480V, 400 – 3200A
Max Dimensions*:
- Height: 36″, Width: 30″, Depth: 16″
Silver plated copper bus with a 1000A/sq. in. current density connects the permanent facility load feeders to industry standard Cam-Lok® E1016 compatible receptacles
NEMA standard hole pattern for permanent facility side connection
Color coded, male Cam-Lok® E1016 compatible single pole receptacles with attached covers to connect customer supplied
female Cam-Lok® E1016 cables from the tap box to mobile generator
- A phase – Brown
- B phase – Orange
- C phase – Yellow
- Neutral – White
- Ground – Green

Enclosure Features

UL® 50 Listed
Carbon steel NEMA Type 3R, for outdoor installation
Powder coated ANSI 61 gray
Corrosion resistant hardware
Pad-lockable front door
Integral lower flip door allowing access to connect the mobile generator cables
Bottom door mechanically interlocked with front door to prevent unauthorized access to receptacles when not in use