208V, 480V Portable Generator Quick Connection (GLQC) Switchboard

SAFE SMART SERVICEABLE SECURE SWITCHBOARD

The FS2-Series allows quick and safe connection of a mobile generator set to facilities experiencing loss of power or temporary loadbank for permanent generator testing. This portable generator quick connection switchboard is rated Type 3R for outdoor installation. Permanent installation and connection of the switchboard to the facility power distribution system will minimize any unplanned power outages. Therefore, it provides easy and safe connection of a temporary loadbank. The primary components of the portable GLQC Quick Connection Switchboard are cam-lok type receptacles and a fixed mount insulated case circuit breaker.

Portable Generator Quick Connection Switchboard

General Features

Floor-Standing
Silver plated copper bus
UL891 Listed
Rating: 800 – 3000A, 480V (3Ø)
- 65kAIC (800 – 2000A)
- 100kAIC (over 2000A)
Color coded, male ‘Cam-lok’ E1016 compatible single pole receptacles with cover

FS2-Series

Circuit Breaker Options

(1) Single 100% rated fixed mounted insulated case circuit breaker, UL^®489 listed, trip unit with adjustable Long time and Instantaneous trip settings
Circuit breaker position Aux Contacts (“a” and “b”)
No main circuit beaker
Dual main circuit beakers
Multiple generator circuit breakers

Enclosure Options

NEMA Type 1 for indoor installation
NEMA Type 3R for outdoor installation
Type 304 stainless steel
Type 5052 aluminum
Powder coated ANSI 61 Gray
Internal Climate Control*
- Anti-condensation Heater w/ Thermostat & Humidistat
- All hardware is stainless steel
- Door handles are padlockable
Door will include an integral lower flip door
- Allows the main door to be closed with the mobile generator cables connected
Typical Dimensions
- 86″H x 36”W x 39”D
Mechanical Lugs for Permanent facility-side connection
Alternative busbar connections with NEMA standard hole pattern and mechanical lugs for use in the event a mobile genset is used that does not have cables with ‘Cam-lok’ compatible plugs

*Requires 120V site power

Monitoring Options

Ground Fault Monitoring:
- Can be easily set to trip the circuit breaker on ground fault or provide alarm indication only
- Shunt Trip – 120VAC for tripping circuit breaker if phase rotation is incorrect or if ground fault logic is configured for tripping on ground fault
- Configured at the factory per your order
  - Can easily be changed in the field
Phase Rotation Monitoring includes:
- Insures mobile generator set phase rotation matches that of the facility
- Provides visual assurance of correct phasing
- Prevents circuit breaker from being closed if phase rotation is incorrect
- Instructions to easily fix incorrect phase rotation are on a label inside each panel

Specific Color Coding for 480V Model

- A phase – Brown
- B phase – Orange
- C phase – Yellow
- Neutral – White
- Ground – Green

Other Options

Captive Key Interlocking prevents inadvertent paralleling of two sources

Provision included for the circuit breaker
Provision with Kirk Key integration into circuit breaker and bottom flip door
Bottom flip door only
Ship loose of matching locks for installation on customer’s equipment

Contact APT factory to discuss any further requirements you may have including:
- Automatic Load Transfer
- Distribution Switchboards
- Service Entrance Rated
- Load Shed Contacts
- Generator Paralleling
- 5kV – 15kV Applications
- And more!